Are your AirPods Pro 2 not canceling noise as well as before? If you recently updated to firmware version 7A294 and noticed the noise cancellation isn’t working as expected, you’re not alone. Many users have faced similar issues after this update. But don’t worry, we’ve got 15 easy fixes that might help you get things back to normal!
1. Check Your AirPods Version
First things first: make sure your AirPods are actually updated to the latest firmware version. Here’s how you check:
- Open Settings on your iPhone.
- Tap Bluetooth and find your AirPods.
- Tap the “i” next to your AirPods and look for the firmware version (it should say 7A294).
If it’s not updated, try keeping your AirPods near your iPhone while they are charging. They might update automatically.
2. Reset Your AirPods Pro
Sometimes, resetting your AirPods can solve the problem. Here’s how:
- Put your AirPods back in the case.
- Press and hold the button on the back of the case for about 15 seconds until the light flashes amber and then white.
- Reconnect your AirPods to your iPhone.
This simple reset can fix many issues.
3. Turn Noise Cancellation Off and On Again
Try switching Noise Cancellation off and then back on. Here’s what you do:
- Swipe down to open Control Center on your iPhone.
- Press and hold the volume slider.
- Switch to Transparency Mode and then back to Noise Cancellation.
This might help the noise-canceling feature to kick back in.
4. Update Your iPhone’s Software
Make sure your iPhone is up to date. Go to Settings > General > Software Update. If there’s an update available, install it. Sometimes the iPhone needs an update to work properly with new AirPods firmware.
5. Charge and Check for New Firmware Updates
Your AirPods might not have installed the update correctly. Put your AirPods in the charging case, connect it to power, and place it next to your iPhone. This can help check for any missing updates.
6. Clean Your AirPods Pro
Dirty AirPods might affect the noise-canceling feature. Take a soft, dry cloth and gently clean the AirPods, especially around the microphones and ear tips.
7. Run the Ear Tip Fit Test
If the ear tips aren’t sealing properly, noise cancellation won’t work well. Run the Ear Tip Fit Test:
- Go to Settings > Bluetooth, tap the “i” next to your AirPods, and select Ear Tip Fit Test.
- Follow the instructions to see if the fit is good.
If the fit isn’t right, try using different ear tips.
8. Reset All Settings on Your iPhone
Resetting your iPhone settings might help fix the issue. Don’t worry, this won’t delete any of your apps or photos, just your settings:
- Go to Settings > General > Reset > Reset All Settings.
This might help clear any Bluetooth problems.
9. Recalibrate Your AirPods Volume
If the noise cancellation seems off, try recalibrating the volume:
- Disconnect your AirPods.
- Play some music on your iPhone’s speaker.
- Reconnect the AirPods and adjust the volume again.
This can help balance the sound.
10. Turn Off ‘Optimized Battery Charging’
Optimized Battery Charging might interfere with updates. Turn it off like this:
- Go to Settings > Battery > Battery Health & Charging and disable Optimized Battery Charging.
This way, your AirPods will always charge fully without delay.
Top 10 iOS Emulators for Android in 2024
Spatial Audio might be affecting noise cancellation. Here’s how to turn it off:
11. Turn Off Spatial Audio
- Open Control Center, press and hold the volume slider, and tap Spatial Audio to turn it off.
This could help improve the noise-canceling effect.
12. Test on Another Device
Try connecting your AirPods Pro 2 to a different iPhone or iPad. If noise cancellation works better on another device, the problem might be with your current phone’s settings.
13. Toggle Bluetooth Off and On
Sometimes, simply turning Bluetooth off and back on can fix minor issues:
- Go to Settings > Bluetooth and turn it off. Wait a few seconds, then turn it back on.
This can refresh the connection.
14. Contact Apple Support
If nothing works, it might be time to get help from the experts. Open the Apple Support app on your iPhone or visit an Apple Store. They can help you figure out if there’s a bigger problem.
15. Wait for the Next Update
Lastly, be patient. Apple often releases small updates to fix problems like this. Keep your AirPods charged and connected to your phone, and you’ll get the next update automatically.
Final Thoughts
It can be frustrating when your AirPods Pro 2 aren’t working as they should, especially after a new update. But these 15 tips should give you a good chance of fixing the issue and getting your noise cancellation back to normal.
If you found this guide helpful, share it with a friend who might be facing the same problem! Happy listening!
